Display flex css конструктор

Обновлено: 03.05.2024

Like we specified in the previous chapter, this is a flex container (the blue area) with three flex items:

The flex container becomes flexible by setting the display property to flex :

Example

The flex-direction Property

The flex-direction property defines in which direction the container wants to stack the flex items.

Example

The column value stacks the flex items vertically (from top to bottom):

Example

The column-reverse value stacks the flex items vertically (but from bottom to top):

Example

The row value stacks the flex items horizontally (from left to right):

Example

The row-reverse value stacks the flex items horizontally (but from right to left):

The flex-wrap Property

The flex-wrap property specifies whether the flex items should wrap or not.

The examples below have 12 flex items, to better demonstrate the flex-wrap property.

Example

The wrap value specifies that the flex items will wrap if necessary:

Example

The nowrap value specifies that the flex items will not wrap (this is default):

Example

The wrap-reverse value specifies that the flexible items will wrap if necessary, in reverse order:

The flex-flow Property

The flex-flow property is a shorthand property for setting both the flex-direction and flex-wrap properties.

Example

The justify-content Property

The justify-content property is used to align the flex items:

Example

The center value aligns the flex items at the center of the container:

Example

The flex-start value aligns the flex items at the beginning of the container (this is default):

Example

The flex-end value aligns the flex items at the end of the container:

Example

The space-around value displays the flex items with space before, between, and after the lines:

Example

The space-between value displays the flex items with space between the lines:

The align-items Property

The align-items property is used to align the flex items.

In these examples we use a 200 pixels high container, to better demonstrate the align-items property.

Example

The center value aligns the flex items in the middle of the container:

Example

The flex-start value aligns the flex items at the top of the container:

Example

The flex-end value aligns the flex items at the bottom of the container:

Example

The stretch value stretches the flex items to fill the container (this is default):

Example

The baseline value aligns the flex items such as their baselines aligns:

Note: the example uses different font-size to demonstrate that the items gets aligned by the text baseline:

The align-content Property

The align-content property is used to align the flex lines.

In these examples we use a 600 pixels high container, with the flex-wrap property set to wrap , to better demonstrate the align-content property.

Example

The space-between value displays the flex lines with equal space between them:

Example

The space-around value displays the flex lines with space before, between, and after them:

Example

The stretch value stretches the flex lines to take up the remaining space (this is default):

Example

The center value displays display the flex lines in the middle of the container:

Example

The flex-start value displays the flex lines at the start of the container:

Example

The flex-end value displays the flex lines at the end of the container:

Perfect Centering

In the following example we will solve a very common style problem: perfect centering.

SOLUTION: Set both the justify-content and align-items properties to center , and the flex item will be perfectly centered:

Группируется в короткую запись и устанавливается первым значением: "flex-flow: row nowrap".

Значения для flex-direction

row: → Слева направо.

row-reverse: ← Справа налево.

column: ↓ Сверху вниз.

column-reverse: ↑ Снизу вверх.

Выравнивание по главной оси

Значения для justify-content

flex-start: ← Прижаты к началу.

flex-end: → Прижаты к концу.

center: → ← Прижаты по центру.

space-between: ← → Равномерно распределяются по всей длине. Первый и последний элемент прижаты к своим краям контейнера.

space-around: ← → Равномерно распределены по всей длине. Пустое пространство перед первым и после последнего элемента равно половине пространства между двумя соседними элементами.

Выравнивание по поперечной оси

Значения для align-items

flex-start: ↑ Блоки выровнены в начале поперечной оси контейнера.

flex-end: ↓ Блоки выровнены в конце поперечной оси контейнера.

center: Блоки выровнены по центру (линии поперечной оси) контейнера.

baseline: Блоки выровнены по базовой линии.

stretch: Блоки растянуты на всё пространство контейнера.

Многострочная организация блоков

Группируется в короткую запись и устанавливается вторым значением: "flex-flow: row nowrap".

Значения для flex-wrap

nowrap: В одну линию.

wrap: В несколько строк.

wrap-reverse: В несколько строк, в противоположном направлении указанном в flex-direction.

Способ выравнивания по вертикали (только многострочный режим)

Значения для align-content

flex-start: ↑ Строки в начале поперечной оси (прижать блоки к верху).

flex-end: ↓ Расположение строк начиная с конца поперечной оси (прижать блоки к низу).

center: Строки по центру контейнера.

space-between: Равномерное распределение строк по всей высоте.

space-around: Равномерное распределение строк по всей высоте с отступом перед первой строкой и после последней, равными половине рсстояния между соседними строками.

stretch: Строки равномерно растянуты.

Ширина контейнера

Высота контейнера

Общие значения для всех блоков × Очистить

Жадность

Отношение размеров у блоков. Блок со значением 2 будет в два раза больше блока со значением 1.

Группируется в короткую запись и устанавливается первым значением: "flex: 0 1 auto".

Сжимаемость

Коэффициент сжатия блоков в контейнере. Указывает степень уменьшения по отношению к другим блокам, для размещения блоков в одну строку.

Группируется в короткую запись и устанавливается вторым значением: "flex: 0 1 auto".

Базовый размер

Основа блока. Является начальным (базовым) размером элемента. Возможно указывать размер в следующих единицах измерения: px, em, %, mm, pt и т.д..

Группируется в короткую запись и устанавливается третьим значением: "flex: 0 1 auto".

Отступ

Внешний отступ. Значение auto работает как по вертикали так и по горизонтали.

Возможно указать отдельные значения для горизонтального и вертикального отступа через пробел.

Пример: "10px auto".

Возможно указать отдельные значения для горизонтального и вертикального отступа через пробел.

Пример: "10px auto".

Порядок (вес)

Порядок следования блока. Блоки с меньшим весом располагаются вначале.

Выравнивание по поперечной оси

Выравнивание блока текущей строки. Переписывает значение контейнера указанного в align-items.

Значения для align-self

auto: Значение родительского контейнера из align-items.

flex-start: ↑ Блоки выровнены в начале поперечной оси контейнера.

flex-end: ↓ Блоки выровнены в конце поперечной оси контейнера.

center: Блоки выровнены по центру (линии поперечной оси) контейнера.

baseline: Блоки выровнены по базовой линии.

stretch: Блоки растянуты на всё пространство контейнера.

CSS ✂ Копировать

HTML ✂ Копировать

Описание flex генератора

Общие сведения

Для простоты, здесь и далее, контейнером называется родительский элемент, а блоками называются дочерние элементы flex технологии.

Использование

Каждый параметр имеет возможность выбора предустановленных значений. Значения по умолчанию выделены фоном. Параметры предусматривающие произвольные значения можно изменять самостоятельно.

В самом низу, под визуальным просмотром, отображается CSS код для текущих установленных значений контейнера, выделенного блока, либо общие значения блоков при отсутствии выделения.

Для удобства, процесс поделен на три последовательные составные части, размещенных в соответствующих вкладках, а также текущий справочный раздел: Контейнер, Блоки, Результат

1. Контейнер

Настройка контейнера flex блоков через установку параметров. Данные настройки имеют отношение исключительно к родительскому элементу flex блоков.

2. Блоки

Настройка flex блоков. Возможно установить количество дочерних блоков, сбросить значения до установленных по умолчанию, установить значения общие для всех блоков или для каждого отдельные значения.

Для установки значений конкретному блоку его необходимо предварительно выделить. Выделение блока возможно по клику на нем. Повторный клик снимает выделение. То же самое делает кнопка "Готово" отображаемая при выделенном элементе, а также переключение на другую вкладку снимает выделение.

У выделенного элемента возможно изменить контент (его текстовое наполнение), а также отдельно для него установить и очистить установленные значения.

3. Результат

Помимо результата, отображающего полный код CSS стилей и HTML, здесь возможно установить ряд настроек совместимости не влияющих на визуализацию.

Поддержка старых браузеров

Поддержка включается во вкладке "Результат" при включенной отметке "Поддержка старых браузеров (префиксы)". Данное действие добавляет предшествующие параметры с префиксами -ms- (только для IE10) и -webkit- (все остальные браузеры).

↑ Выберите блок для задания индивидуальных параметров

Контейнер ✂ Копировать

Блоки ✂ Копировать

Даты и версии начала поддержки Flex в браузерах

Колонки можно сортировать по дате и названию браузера.

Особенности старых браузеров IE

По умолчанию в IE10 параметр flex имеет значение "-ms-flex: 0 0 auto" вместо "flex: 0 1 auto". Третье значение, flex-basis, в параметре "flex: 0 1 auto" для IE11 обязательно. Некорректно рассчитывается высота при установленных у блоков значений min-height и вертикальное выравнивание для IE10 и IE11.

Рад представить Вам интерактивный инструмент для генерации верстки основанной на гибких макетах сетки (CSS Flexbox Layout), он позволит наглядно произвести верстку необходимого блока для Вашего сайта. Кроме того, вы сможете максимально быстро обучиться этой технологии верстки, используя встроенные подсказки для каждого CSS свойства, или при необходимости перейти в справочник CSS свойств для получения более детальной информации о конкретном свойстве.

Если Вы ранее не сталкивались с моделью построения макетов страниц Flexbox, но хотите более детально познакомиться с ней, то подробную информацию об этом вы сможете получить в следующих статьях учебника, посвященному CSS:

Конструктор Flexbox

Настройки контейнера

  • flex - элемент отображается как блочный флекс контейнер.
  • inline-flex - элемент будет отображаться как строчный флекс контейнер.
  • row - флекс элементы отображаются горизонтально, в виде строки. Это значение по умолчанию.
  • row-reverse - флекс элементы отображаются горизонтально, в виде строки по аналогии со значением row , но формирование строки идёт в обратном направлении.
  • column - флекс элементы отображаются вертикально как колонны. Формирование колонны осуществляется сверху вниз.
  • column-reverse - флекс элементы отображаются вертикально как колонны по аналогии со значением column , но формирование колонны идёт в обратном направлении (снизу вверх).
  • nowrap - Указывает, что флекс элементы выстраиваются в одну строку. Это значение по умолчанию.
  • wrap - Указывает, что флекс элементы внутри контейнера располагаются в несколько горизонтальных рядов (в случае переполнения).
  • wrap-reverse - Указывает, что флекс элементы внутри контейнера располагаются в несколько горизонтальных рядов (в случае переполнения) по аналогии со значением wrap , но формирование строк идёт в обратном порядке.
  • stretch - строки внутри контейнера равномерно растягиваются, заполняя свободное пространство. Это значение по умолчанию.
  • flex-start - строки внутри контейнера располагаются в начале поперечной оси флекс контейнера.
  • flex-end - строки внутри контейнера располагаются в конце поперечной оси флекс контейнера.
  • center - строки внутри контейнера располагаются по его центру.
  • space-between - строки внутри контейнера равномерно распределяются, при этом первая строка позиционируются в начале поперечной оси, а последняя строка позиционируется с конца поперечной оси.
  • space-around - строки внутри контейнера равномерно распределяются, при этом пространство между двумя соседними строками одинаково, а пустое пространство перед первой строкой и после последней строки равно половине от пространства между соседними строками.
  • space-evenly - размещает четный промежуток между каждой строкой, включая верхний и нижний край контейнера.
  • flex-start - элементы позиционируются в начале контейнера. Это значение по умолчанию.
  • flex-end - элементы позиционируются в конце контейнера.
  • center - элементы позиционируются в центре строки контейнера.
  • space-between - элементы равномерно распределяются по всей строке, при этом первый элемент позиционируются в начале контейнера, а последний элемент позиционируется в конце контейнера.
  • space-around - элементы равномерно распределяются по всей строке, при этом пустое пространство между первым и после последнего элемента равно половине между соседними элементами в контейнере.
  • space-evenly - размещает четный промежуток между каждым элементом, включая начальний и дальний конец контейнера.
  • stretch - флекс элементы растягиваются по размеру контейнера вдоль поперечной оси. Это значение по умолчанию.
  • center - элементы располагаются по центру строки контейнера (середина поперечной оси, или оси столбца).
  • flex-start - элементы располагаются в начале строки контейнера.
  • flex-end - элементы располагаются в конце строки контейнера.
  • baseline - элементы распологаются по их базовой линии.

Настройки элементов

Настройка элемента

Выберите любой вложенный элемент для настройки.

order ? Устанавливает порядок следования флекс элемента в контейнере относительно остальных.
Если вы указываете значение для одного флекс элемента в контейнере, то это значение не будет являться его порядковым номером, а указывает только на "вес" его позиции по отношению к другим элементам. Допускается применение отрицательных значений (значение -1, например, смещает элемент к левому краю родительского контейнера). Значение по умолчанию 0 .

  • auto - элемент наследует значение его родительского контейнера. Если родительский контейнер не имеет значения, то значение, устанавливается, как stretch . Это значение по умолчанию.
  • stretch - элемент растягивается по размеру строки контейнера вдоль поперечной оси.
  • center - элемент располагается по центру строки контейнера (середина поперечной оси).
  • flex-start - элемент располагается в начале строки контейнера (начало поперечной оси).
  • flex-end - элемент располагается в конце строки контейнера (конец поперечной оси).
  • baseline - элемент распологается по его базовой линии строки контейнера.

flex-grow ? Указывает на сколько элемент может увеличиться по отношению к остальным флекс элементам в одном контейнере.
Например, если в контейнере все блоки имеют значение свойства равное 1, а один блок имеет значение 2, то это означает, что он будет в два раза больше по отношению к ним (относительное значение). Если мы при этом добавим в контейнер еще один блок, то при этом ширина контейнера не изменится, а блок, который имел значение 2 по прежнему останется в два раза больше остальных, при этом ширина всех блоков пропорционально уменьшится. Значение по умолчанию 0.

flex-shrink ? Определяет, как элемент будет сжиматься относительно остальных флекс элементов в контейнере (при недостатке свободного пространства). Если мы устанавливаем значение равное 0, то мы запрещаем сжиматься элементу до размеров меньше чем его базовая ширина. Значение по умолчанию 1 .

flex-basis ? Определяет размер для флекс элемента, установленный по умолчанию перед распределением пространства внутри флекс контейнера. Допускается использование как абсолютных значений (px, em, pt и так далее), так и значения в процентах. Значение по умолчанию auto (если элемент не имеет заданного размера, то размер будет высчитываться в зависимости от содержания элемента).

flex ? Является короткой записью для свойств flex-grow , flex-shrink и flex-basis .
Значение по умолчанию 0 1 auto .

Easily build flexible, responsive layouts—without writing code. Only in Webflow.

Flexbox
game
Feeling Playful?

What’s flexbox?

It’s a powerful layout mechanism that lets you solve common responsive web design problems with ease. And with Webflow, you can do it all in 2 simple interfaces.

1. Flex parent settings


Just set a parent element to display: flex, then define alignment, wrap child elements into rows, or reverse the layout.

2. Flex child settings


Then give the child elements their own resizing behavior, alignment options, and even device-specific display order.

What you can do with flexbox

Flexbox can help you solve some seriously tough layout problems—like those below—in seconds.

Creative layouts

Easily build creative layouts that let your content shine.

Split-screen

Create a split-screen layout in seconds.

Sidebar

Stick your sidebar in place alongside scrolling content.

Sticky footer

Keep your footer in its place — at the bottom of the page.

Hero cover

Create a fullscreen hero cover page.

Holy grail

Create a fully responsive layout with a header, footer, and a 3-column body.

Fluid grid

Build a beautifully reflowing grid in a matter of minutes.

Popular design patterns

Easily achieve popular but difficult design patterns.

Centering

Vertically center content with a couple clicks.

Equal-height modules

No matter how many Really Long Headlines you write.

Collection grid

Highlight a key element in a collection or gallery.

Feature lists

Bang out those ubiquitous feature list designs in no time.

Pricing table

Build a pricing table. Without using any tables.

Simple grids

Easily create a beautiful grid to guide your designs.

Split-screen layout

Create a split-screen layout in seconds — without using any grid systems.

1. Make a flex container

Make a flexbox container by adding a div block or section and setting it to Display: Flex .

By default, the layout direction will be horizontal and children will stretch vertically—perfect for this layout.


2. Apply flex sizing to 2 divs to split the screen

Add 2 div blocks to the flexbox container and give them the same class.

Set Sizing: Expand on both divs to make them evenly fill their parent's widths.


Crowdsource gen-z gamification

Term-sheet responsive web design accelerator ramen low hanging fruit prototype buzz startup direct mailing rockstar venture. Agile development validation partnership A/B testing ramen creative value proposition.

Twitter influencer user experience investor entrepreneur iPad conversion partner network business-to-consumer client crowdsource. Focus gamification sales buyer.

Sidebar layout

Easily create a sticky sidebar that always displays alongside scrolling content.

1. Make a flex container

For this example, we'll use the same type of flex container we used for the split-screen layout.

So add a container, apply Display: Flex and keep the default alignment options.

Note: in a real-world example, the container needs Height: 100vh to fill the browser window's full height.


2. Apply sizing to flex children

Add 2 div blocks inside the flex container and give them their own classes.

Give the sidebar element Width: 30% and the main content element Sizing: Expand.

In order to make the main content element scrollable, apply Overflow: Scroll to it.



Pitch Infrastructure

Creative innovator learning curve

Prototype rockstar

Churn rate non-disclosure agreement buyer focus ecosystem iPad. Release venture crowdsource burn rate facebook paradigm shift supply chain prototype responsive web design partnership deployment. Innovator crowdsource holy grail advisor. Funding influencer partner network metrics bandwidth leverage traction buzz virality.

Twitter stock equity vesting period learning curve launch party pitch innovator series A financing churn rate handshake. Venture graphical user interface bandwidth influencer sales technology pitch. Marketing iPad angel investor. Social media accelerator seed round conversion traction success pitch advisor.

Accelerator partnership

IPhone deployment product management crowdfunding agile development partner network gen-z advisor validation business plan. Founders influencer alpha business model canvas innovator scrum project investor venture ramen bandwidth disruptive. Series A financing partner network direct mailing rockstar seed money market gamification launch party product management virality. Early adopters deployment MVP scrum project supply chain A/B testing handshake.

Metrics funding venture pivot non-disclosure agreement client long tail niche market pitch agile development freemium. Mass market incubator user experience iPad scrum project equity burn rate handshake research & development. Gamification infrastructure business-to-business. IPhone branding responsive web design business model canvas buzz founders infrastructure creative stock accelerator funding.

Sticky footer

Put your footer in its place—at the bottom of page—no matter how thin the content is.

To create a flexbox, set the display property on the parent container element to flex for a block-level flex container or inline-flex for an inline-level flex container. Both of these values define the element as a "flex container" and its children as "flex items".

row row-reverse column column-reverse

The flex-direction property specifies how flex items flow within a flex container by setting the container's main axis either horizontally (like rows) or vertically (like columns).

  • With the flex-direction set to row , flex items are added from left to right
  • With the flex-direction set to row-reverse , flex items start on the right and are added on the left.
  • With the flex-direction set to column , flex items are added from top to bottom
  • With the flex-direction set to column-reverse , flex items start on the bottom and are added on the top.

This property also defines the cross axis (which is perpendicular to the main axis) which is implemented when the flex-wrap property is set to wrap or wrap-reverse . Note that row and row-reverse are reversed if the direction property is rtl .

In the flex container above, the flex-direction is indicated by a blue arrow in the upper left corner.

nowrap wrap wrap-reverse

By default, flex items are laid out in a single line (row or column). Setting the flex-wrap property allows content to wrap onto multiple lines (rows or columns) while setting the direction of the cross axis in the process.

If the flex-direction is set to row or row-reverse and flex-wrap is set to wrap , flex items will wrap from top to bottom ( wrap-reverse would make flex items wrap from bottom to top).

If the flex-direction is set to column or column-reverse and flex-wrap is set to wrap , flex items will wrap from left to right ( wrap-reverse would make flex items wrap from right to left).

When the flex-wrap property is set to nowrap , flex items will be added to fit the flex container and overflow the container if the flex items can't be shrunk to fit. Note that the wrapping of columns will be reversed if the direction property is rtl.

In the flex container above, the cross axis is indicated by a green arrow in the upper right corner.

flex-start flex-end center space-between space-around

The justify-content property specifies how the browser distributes space between and around flex items along the main axis of their container.

  • flex-start : Pack flex items at the start of the main axis (akin to left justified if the flex-direction was row)
  • flex-end : Pack items at the end of the main axis (akin to right justified if the flex-direction was row)
  • center : Pack items around the center (akin to centered)
  • space-between : Distribute items evenly with the first item at the start and the last at the end
  • space-around : Distribute items evenly with equal space around each item

stretch flex-start flex-end center baseline

Similar to justify-content but for the perpendicular cross axis direction.

  • flex-start : Align to cross axis start
  • flex-end : Align to cross axis end
  • center : Center flex items along the cross axis
  • baseline : Align the flex items’ baselines
  • stretch : Stretch flex items to fit their container along the cross axis

stretch flex-start flex-end center space-between space-around

The align-content property aligns a flex container's lines along the cross axis when there is extra space, similar to how justify-content aligns individual items within the main axis. This property has no effect on single line flexible boxes.

  • flex-start : Pack lines from the cross-axis start
  • flex-end : Pack lines from the cross-axis end
  • center : Pack lines around the cross-axis center
  • space-between : Distribute lines along the cross-axis, start to end
  • space-around : Distribute lines along the cross-axis, equally spaced
  • stretch : Stretch lines to occupy the whole cross-axis

The following properties affect flexbox items.
Click an item in the flex container to modify it.

The flex-grow property specifies the "flex grow factor" of a flex item which determines how much the flex item will grow relative to the rest of the flex items in the flex container when positive free space is distributed (negative numbers are invalid). The initial value is 0 .

The flex-shrink property specifies the "flex shrink factor" of a flex item which determines how much the flex item will shrink relative to the rest of the flex items in the flex container when negative free space is distributed (negative numbers are invalid). Note: The flex shrink factor is multiplied by the flex base size when distributing negative space. This distributes negative space in proportion to how much the item is able to shrink, so that e.g. a small item won't shrink to zero before a larger item has been noticeably reduced. The initial value is 1

The flex-basis property specifies the initial main size of a flex item. Defined as a number followed by an absolute unit such as px , mm or pt , or a percentage of the parent flex container main size property. Negative values are invalid. It takes the same values as the width property. The initial value is auto

auto flex-start flex-end center baseline stretch

Aligns flex items of the current flex line overriding the flex container's align-items value. The initial value is auto.

  • auto : Computes to parent's align-items value or stretch if the element has no parent.
  • flex-start : The cross-start margin edge of the flex item is flushed with the cross-start edge of the line.
  • flex-end : The cross-end margin edge of the flex item is flushed with the cross-end edge of the line.
  • center : The flex item's margin box is centered within the line on the cross-axis. If the cross-size of the item is larger than the flex container, it will overflow equally in both directions.
  • baseline :All flex items are aligned such that their baselines align. The item with the largest distance between its cross-start margin edge and its baseline is flushed with the cross-start edge of the line.
  • stretch : Flex items are stretched such as the cross-size of the item's margin box is the same as the line while respecting width and height constraints.

Controls the order in which children of a flex container appear inside the flex container. Flex items are, by default, displayed and laid out in the same order as they appear in the source document. A flex container lays out its content in order-modified document order, starting from the lowest numbered ordinal group and going up. Items with the same ordinal group are laid out in the order they appear in the source document. The inital value is 0 and negative values are permitted.

What is Flexbox?

Flexbox is a way to layout elements to accommodate different screen sizes. Flexbox does not rely on floats and margins, and the flex container's margins don't collapse with the margins of its contents. Note that some browsers need prefixes to use these features.

The "flex" in flexbox comes from its ability to alter its items' width, height and order to best fill the available space. Flexible items expand and shrink to fill the available space.

Flexbox content begins with a container whose display property is set to flex or inline-flex. Any elements within that container are now automatically flex-items. Every flexible box layout follows two axes. The main axis is the axis along which the flex items follow each other. The cross axis is the axis perpendicular to the main axis. For example, if we have the flex-direction set to row, the main axis is horizontal (left to right unless the direction is set rtl) and the cross direction is vertical (top to bottom)

What isn't Flexbox?

The answer to every layout problem. Like any tool, flexbox has its place in your toolbox, but it's not meant to be a cure-all for every layout issue.

Properties Used

  • The display property defines how a particular HTML element should be displayed.
  • The flex-direction property indicates the direction in which the flex elements are located inside the container.
  • The flex-wrap property determines whether the flex container will be single-line or multi-line. If multi-line is enabled in the container, this property also allows you to control the direction in which the flex elements are placed.
  • The justify-content property determines how the browser distributes the space between and around the flex elements along the main axis of the container (horizontally), or aligns the entire grid layout along the axis of the grid container row.
  • The align-items property aligns all the elements inside the flex container along the transverse axis, or aligns all elements of the grid layout along the axis of the column.
  • The align-content property determines how the browser distributes the space between and around the flex elements along the transverse axis of the container (vertically), or aligns the entire grid layout along the axis of the grid container column.
  • The flex-grow property indicates how much an element can increase in relation to other flex elements in one container.
  • The flex-shrink property determines how the element will be compressed relative to other flex elements in the container (with a lack of free space).
  • The flex-basis property defines the default size for the flex element before allocating space in the container.
  • The align-self property specifies the alignment of individual row elements inside a flex container, or aligns a grid layout element inside a cell along the column axis of a grid container.
  • The order property sets the order of the flex element in the container relative to the rest.

Share this Page

If you have enjoyed using CSSPortal, please consider sharing this page with other users, just click on your preferred social media link or copy the webpage from the link below.

Читайте также: