F4u corsair из лего

Обновлено: 24.04.2024

The first production Corsairs were delivered to the US Navy in July 1942, but they were not immediately accepted due to problems encountered during aircraft carrier landings. While these problems were being worked out, the Navy passed on their Corsairs to land-based US Marine aviation units in the Pacific. The first Marine Piloted Corsairs arrived in the Pacific during February 1943, and within months there were favorable results against Japanese Aircraft. The Marines soon discovered the Corsairs were an immensely capable ground attack aircraft and was ideally suited for CAS (Close-Air Support) operations. By the end of 1943, Corsairs were attacking ground targets with bombs, napalm tanks and rockets. The carrier landing problems were eventually resolved and the Corsair was officially adopted for use by the US Navy in February 1944. Corsairs would continue to be used by the Navy and Marines well into the 1950s and proved invaluable in the CAS role.

The Corsair's record backs up its reputation as one of the top fighter aircraft of WWII. Its over-all kill ratio against Japanese aircraft was more than 11:1 and more than 6:1 against their most capable fighters. It also delivered more than 70% off all bombs dropped by US fighter aircraft during the war. The Japanese considered the Corsair to be the most formidable enemy aircraft and nicknamed it "Whistling Death" in reference to the sound made by the Corsair's wing front air intakes.

2121-corsair-action-1200.jpg

Additional information about this Brickmania custom building kit:

The F4U Corsair kit includes the following features:

  • Realistic folding wings for storage in your aircraft carrier's hanger deck (aircraft carrier not included)
  • Retractable landing gear and optional bomb rack with 1000-pound bomb
  • Retractable windscreen, realistic cockpit, and higher pilot mini figure included
  • Trio-tone camouflage color accurate for late WWII Pacific Theater
  • Premium vinyl sticker sheet included
  • Built in 1/35 scale to match Brickmania's other models
  • Made from 696 genuine LEGO® elements
  • Advanced Skill Level (6-8 years of building experience recommended)

This Brickmania model kit is made from genuine unused LEGO elements and is shipped disassembled. Also included are full-color printed building instructions and is packaged in a sealed box. All Brickmania building kits are limited production and may be discontinued at any time .

Preview Video:

Il Chance Vought F4U CORSAIR è uno degli aeroplani piu iconici della seconda guerra mondiale, costruito in moltissimi esemplari a partire dal 1942 ( l’ultimo esemplare fu assemblato nel 1979).

Utilizzato prevalentemente allla USA NAVY è stato il principale caccia imbarcato nelle portaerei

Questo modello è completamente assemblabile con parti reperibili su Bricklink (891 pezzi totali), misura 57×44 STUDS (45×35 cm) per un peso totale di oltre 600 grammi.

Questo modello prevedo lo spazio per una minifigures in cabina, il carrello di atterraggio a scomparsa sotto le ali come nel modello originale e le ali che si ripiegano per l’ imbarco sulle portaerei.

E’ un modello stabile da esposizione anche se non giocabile, è stato costruito fisicamente nella versione MK5, consiglio di aquistarlo solo ai costruttori di buon livello.

Con l’ aquisto delle istruzioni avrete inclusi tutti e 3 i modelli con istruzioni specifiche e lista dei componenti di ognuno.

I prezzi dei componenti su bricklink ad oggi sono i seguenti (da aggiungere spese di spedizione)

CORSAIR NIGHTHUNTER 95€

CORSAIR PROTO TEST TYPE “SALLY” 130€

CORSAIR MK5 NAVY PATTERN 249€

The Chance Vought F4U CORSAIR is one of the most iconic airplanes of the Second World War, built in many examples starting from 1942 (the last one was assembled in 1979).

Used mainly in the USA NAVY, it was the main fighter embarked on aircraft carriers

This model is fully assembled with parts available on Bricklink (891 total pieces), measuring 57×44 STUDS (45×35 cm) for a total weight of over 600 grams.

This model provides space for a minifigures in the cabin, the landing gear retractable under the wings as in the original model and the wings that fold for boarding on aircraft carriers.

It is a stable model for display even if not playable, it was physically built in the MK5 version, I recommend buying it only for good builders.

With the purchase of the instructions you will have included all 3 models with specific instructions and list of components of all separated models.

The prices of components on bricklink to date are as follows (shipping costs to be added)

Current Stock: 0 SKU: BKM2219 Availability: Ships within 1-3 business days. Weight: 2.41 LBS Shipping: Calculated at Checkout Designer: Cody Osell Piece Count: 541 Minifigs: 1 Skill Level: Advanced (4 of 5)

About the F4U Corsair - WWII Carrier-Based Fighter-Bomber:

A legend of World War II, the F4U Corsair saw significant combat in the Pacific Theater after 1943. This carrier-based fighter-bomber boasted an impressive kill ratio of 11:1 against Japanese fighters such as the Zero. Its bomber capabilities helped support major operations at the Marshall Islands, Okinawa, and Iwo Jima by performing dive-bomb strikes against fortified Japanese positions. The story is that the Japanese referred to the warplane as “Whistling Death” for the noise it made as it dove for an attack run.

Specifications:

  • Crew: 1
  • Engine: Pratt & Whitney R-2800-18W 18 cylinder “Double Wasp” air-cooled
  • Speed: 416 mph (670 km/h)
  • Range: 1,016 mi (1,635 km)
  • Armament: 6x .50 caliber M2 Browning machine guns

F4U Corsair - WWII Carrier-Based Fighter-Bomber

Features of this Brickmania™ Kit:

The Brickmania F4U Corsair has been updated with several new features, including a new bubble canopy, printed exhaust ports, dive flaps, and an all-around stronger design. It also features a brick-built, three-tone camouflage, a high-quality sticker sheet with “Stars and Bars”, and an American pilot minifigure. The Corsair kit also includes conversion instructions to display your warplane with its wings folded up as if it were stowed on an aircraft carrier.

Model Statistics:

  • 541 new-condition elements from LEGO®
  • Full-color printed building instructions
  • 1/35th scale to match other Brickmania kits
  • Model designed by Cody Osell
  • Advanced Skill Level (6–8 years experience with LEGO is recommended)

All Brickmania model kits are made of new-condition LEGO bricks. This model comes disassembled and includes complete printed building instructions and comes packaged in a sealed box. This is a limited-edition kit and production may be discontinued at any time.

f4u_172_ac_1657.jpg

Особенности модели: 41 деталь из темно-серого пластика, 3 детали из прозрачного пластика, декаль на два варианта:

Airfix 1/72 Vought F4U-1D Corsair

f4u_172_af_2054_1.jpg

Артикул производителя: 115 / 02054-3 / 01035-5 / 02054

Старая модель, впервые появившаяся в 1964 г. и с перерывами выпускаемая до 1998 г. Неправильная геометрия, слабая деталировка, внешняя расшивка.

Airfix 1/72 Vought F4U Corsair Special Edition

f4u_172_af_02090.jpg

Артикул производителя: 02090

Перепаковка модели Airfix F4U-1D в серии Warld War II Aircraft of the Aces с новой декалью. Модель выпускалась с 1989 г. по 1995 г.

Airfix 1/72 Vought F4U Corsair Fleet Air Arm

f4u_172_af_02044.jpg

Артикул производителя: A02044

Перепаковка модели Airfix F4U-1D с новыми декалями. Выпускается с 2009 г.

Frog 1/72 Corsair IV F4U-6

f4u_172_fr_f243_1.jpg
f4u_172_fr_f243_2.jpg

Артикул производителя: F243F / F243

Особенности модели: 38 деталей из серого пластика, 1 деталь из прозрачного пластика, декаль на два варианта:

Старая модель 1970-х гг. Неправильная геометрия, слабая деталировка, внешняя расшивка.

Hasegawa 1/72 F4U-1 Corsair Birdcage "Guadalcanal"

f4u_172_has_00197.jpg

Артикул производителя: 00197

Особенности модели: 43 детали из серого пластика (10 из них не используются), 3 детали из прозрачного пластика, декаль на два варианта:

Модель 1970-х гг. Внешняя расшивка, но приемлемая геометрия и детализация.

Hasegawa 1/72 F4U-1A Corsair "RNZAF"

Артикул производителя: 00704

Hasegawa 1/72 Corsair Mk.I

Артикул производителя: C14 / JS153

Hasegawa 1/72 Corsair Mk.I Fleet Air Arm

Артикул производителя: 00646

Hasegawa 1/72 F4U-1D Corsair

Артикул производителя: C13 / JS151

Hasegawa 1/72 F4U-1D Corsair

f4u_172_has_a10.jpg

Артикул производителя: A10

Особенности модели: 35 деталей из серого пластика, 1 деталь из прозрачного пластика, декаль на два варианта:

HobbyBoss 1/72 F4U-1 Corsair "Easy build"

f4u_172_hb_80217.jpg

Артикул производителя: 80217

HobbyBoss 1/72 F4U-4 Corsair "Easy build"

f4u_172_hb_80218.jpg

Артикул производителя: 80218

Intech 1/72 F4U-1 Corsair

f4u_172_int_t23.jpg

Артикул производителя: T23

Особенности модели: 41 деталь из серого пластика, 2 детали из прозрачного пластика, декаль на один вариант:

Italeri 1/72 F4U-4B Corsair

Артикул производителя: 062

Особенность модели: 81 деталь из темно-синего пластика, 2 детали из прозрачного пластика, декаль на три варианта:

Italeri 1/72 F4U-5N Corsair

Артикул производителя: 044

Особенности модели: 45 деталей из темно-синего пластика, 2 детали из прозрачного пластика, декаль на два варианта:

Аккуратная внутренняя расшивка и заклепки. Несмотря на огрехи (фюзеляж короче примерно на 3 мм, неправильный выхлоп, неправильные створки хвостового колеса, ошибки в линиях расшивки) - лучший из поздних Корсаров.

Italeri 1/72 F4U-5N Corsair Gift Set

f4u_172_it_71044.jpg

Артикул производителя: 71044

Подарочное издание, включающее кисть и набор красок.

Italeri 1/72 F4U-7/AU-1 Corsair

Matchbox 1/72 Chance Vought F4U-4 Corsair


ASCII���Created by PhotoWatermark Professional

Артикул производителя: PK-014 / 40014

Особенности модели: 23 детали из темно-серого пластика, 13 деталей из голубого пластика, 1 деталь из прозрачного пластика, декаль на два варианта:

Старая модель, впервые выпущенная в 1972 г. и производившаяся несколько лет. В 1982 г. была перевыпущена Revell под маркой Matchbox. Неправильная геометрия, слабая деталировка, «траншейная» внутренняя расшивка.

Minicraft 1/72 F4U-1

f4u_172_mc_1179.jpg

Артикул производителя: 1179

Перепаковка модели Hasegawa F4U-1.

Novo 1/72 F4U-6 Corsair IV

f4u_172_novo_78053.jpg

Артикул производителя: 78053

Особенности модели: 38 деталей из серого пластика, 1 деталь из прозрачного пластика, декаль на два варианта:

Revell 1/72 F4U-1 Corsair


ASCII���Created by PhotoWatermark Professional

Артикул производителя: 04112

Особенности модели: 37 деталей из белого пластика, 1 деталь из прозрачного пластика, декаль на два варианта:

Модель, впервые выпущенная в 1970-х гг. Неправильная геометрия, слабая деталировка, внешняя расшивка.

Revell 1/72 F4U-1D Corsair



Артикул производителя: H-625

Модель британского подразделения Revell. Выпускалась с 1963 г.

Revell 1/72 F4U-5 Corsair

f4u_172_rev_04143.jpg

Артикул производителя: 04143

Особенности модели: 62 детали из темно-синего пластика, 2 детали из прозрачного пластика, декаль на два варианта:

Перепаковка 2000 г. модели Italeri F4U-5N. Соответственно, позволяет собрать и ночной вариант.

Smer 1/72 F4U-1 Corsair

Артикул производителя: 0835

Smer 1/72 Chance Vought F4U-1 Corsair

Артикул производителя: 0885

Tamiya 1/72 Vought F4U-1 Corsair 'Bird Cage'

f4u_172_tam_60774.jpg

Артикул производителя: 60774

Все три модели Tamiya – лучшее воплощение ранних модификаций Corsair в масштабе 1/72. Геометрия практически без изъянов, высокая качество воспроизведения поверхности и деталей, супердеталировка для данного масштаба. Крайне рекомендуется как для сборки «из коробки», так и с использованием афтермаркета.

Tamiya 1/72 Vought F4U-1A Corsair

f4u_172_tam_60775.jpg

Артикул производителя: 60775

Tamiya 1/72 Vought F4U-1D Corsair

Артикул производителя: 60752

Особенности модели: 73 детали из серого пластика, 6 деталей из прозрачного пластика, декаль на три варианта:










Сборка модели трудностей не составляет (стыкуемость на 4 из 5), шпатлевки я использовал по минимуму, порадовали тонкие задние кромки (. ). Но у меня опять возникла проблема с пластиком от Академии (как и с B-17), он вроде бы клеится нормально, но после грунтовки (или покраски) все равно появляются трещины по швам. Клей пробовал разный - и Тамия (и супертекучий и обычный), и Ревелл - эффект одинаковый. Именно поэтому немного устал - может, мои шишки кому-то помогут в постройке. Этими же клеями отлично клеятся пластик Eduard и Trumpeter.

Двигатель доработал - установил новые толкатели из проволоки (припой), добавил топливопроводы из медной проволоки, на картер двигателя установил болты. БАНО сделал из прозрачного литника. Как всегда сделал проводку, установил сеточки. В кабину посадил пилота от Eduard'овской Аэрокобры.

Окраска - по обычной технологии, ничего нового пока не придумал. Честно, я думал, что слабым местом модели окажутся известные Академовские декали, но тут я был приятно удивлен - приварились как родные (правда, я пользуюсь Micro Set и Sol).

Отдельное спасибо Дмитрию Куксову за подарок, надеюсь, Вам понравится модель!

Читайте также: